CK-N系列单向离合器

CK-N系列单向离合器结构简图

CK-N系列单向离合器技术参数表

产品特性

    CK-N系列为不含油封及无轴承支撑的滚柱式单向离合器，适用于低运转速度。

    CK-N系列主要应用于包装机械、印刷机械等设备上的防止逆转，定位给料；可最小的空间内提供大的扭矩。

    Type CK-N is roller type one-way clutch integrate without supporting bearing and oil seal, and is suitable to application at low running speed.

    Unit primarily used as a backstop or indexing clutch in packing and printing. This type provides a high torque capacity with a minimum space requirement.

CK-N系列单向离合器安装示意图

安装要求

安装时，螺栓与摆杆槽孔的间隙为槽孔的1%宽度，螺杆与离合器在安装后绝不可能有内应力存在（安装时螺栓不可将扭力臂轴向锁住，径向也要留有间隙，使得没有弯曲应力施加于轴承及摆杆上）。

A bolt,secured to a fixed part of the machine and passing through the slot in the torque arm, provides the rotational stop. Radial clearance on this bolt should be equal to 1% of the slot width. The torque arm and the bearings must not be prestressed.